Category: Tech Prod
-
For costuming, I learned how to sew multiple different stitches, and how to use a sewing machine. First is the running stitch. Take a needle and thread and tie the end of the thread so it won’t go through the fabric. Then, push the needle through one side of the fabric. Do the same thing…
-
For my carpentry project, I had to make the base of my platform. The things I need for this project are a miter joint, a half-lap joint a tape measure, a flat, a pen or pencil, some clamps, and safety goggles. Let’s start with the miter joint. First things first, you measure your boards and…
-
For painting, I had to do various techniques for painting and texture over the course of a month. Before I do anything, I put a piece of white, thin masking tape down the middle of the platform. First, I took our platforms and started our first layer. On the left side, I take some red…
-
As part of my grade in Technical Production, I had to have 20 hours of production work outside of class. Unfortunately, I only took one photo during production hours because I was busy working and couldn’t have my phone out. So enjoy these sketches I drew to recreate some of what I did! On Feb.…
Emma Snide Media Portfolio 